Ohio Product Liability Attorney reviews Defective Medical Devices Recalled to Prevent Further Injuries
In 2017 alone, there were millions of medical device units involved in Class I recalls, initiated by the U.S. Food and Drug Administration (FDA). Many of these devices are put to market under a pre-approval process and not properly tested before they eventually cause injuries to American consumers and recipients. All too often, defective medical devices are recalled only after they cause serious health problems to patients and face lawsuits for producing, marketing and distributing dangerous products to the public.
In the United States, the FDA may initiate a “recall” when a device manufacturer takes a correction or removal action to address a problem with a medical device that is deemed hazardous or violates FDA law. Recalls most often occur when a medical device is defective, or poses health risks.
With medical devices, a recall usually does not mean that you can return the product to the company. In implanted devices, for example—knees, hips, shoulders, abdominal mesh—the situation is more complex and may involve implant replacements and revision surgeries. When an implanted device has the potential to fail unexpectedly, companies may recommend that patients remove the device.
Recalls can lead to the following types of actions:
- Inspecting the device for problems
- Repairing the device
- Adjusting settings on the device
- Re-labeling the device
- Destroying the device
- Notifying patients of a problem
- Monitoring patients for health issues
Many of the medical devices on the market may be inadequately tested, and victims and attorneys have the right to file claims against negligent companies. When a company injures patients with defective medical devices, lawsuits may be necessary to restore financial losses and other damages incurred.
Joe Lyon is a highly-rated Cincinnati product liability lawyer and Ohio medical device attorney who has successfully represented individuals throughout the country in complex product liability litigation.
The Lyon Firm works with medical specialists and engineers to determine the root cause of medical device failures.
Types of Medical Devices Commonly Recalled
Recalls are classified into three categories by the FDA to indicate the relative degree of hazard presented by the medical device. The classes are described as such:
- Class I—there is a reasonable probability that the use of the device will cause serious adverse health consequences or death.
- Class II—the use of the device may cause temporary or medically reversible adverse health consequences. The probability of serious adverse health consequences is remote.
- Class III—the use of the medical device is not likely to cause adverse health consequences.
Types of medical devices recalled in the last few years include:
- Hernia Mesh
- Breast Implants
- Transvaginal Mesh Implants
- Heater Cooler
- Hip Replacements
- Knee Implants
- Shoulder Replacements
- Da Vinci Robot Surgery System
- Bone Grafts
- IVC Filters
- Surgical Staplers
- Transseptal Needles
Current Defective Medical Devices Prompting Lawsuits
- Atrium C-Qur Mesh
- Bard Composix Kugel Mesh
- Bard IVC Filters
- Covidien Parietex Hernia Mesh
- CareFusion AVEA Ventilators
- Wright Hip Implants
- Depuy Hip Implants
- Arthrex iBalance knee replacement
- Exactech Optetrak knee replacement
- CareFusion AVEA ventilators
- Essure Birth Control System
- Ethicon Physiomesh
- Ethicon Proceed Ventral Patch
- Infuse Bone Grafts
- LivaNova Heater-Coolers
- Stryker Accolade Hip
- Stryker Citation Hip
- Stryker Meridian Hip
- Stryker ABG Rejuvenate Hip
- Smith & Nephew Birmingham Implants
- Zimmer Kinectiv M/L Stem Hip Implants
- Zimmer Biomet Shoulder Systems
Injuries & Complications: Defective Medical Devices
The FDA maintains a database that records thousands of adverse event reports associated with medical devices. Some patients may face greater health risks than others, though device implants almost always carry some level of complication risk. Common injuries and complications of defective medical devices include:
- Severe Infection
- Revision Surgery
- Chronic Pain
- Bone Fracture
- Allergic reaction
- Nerve Damage
- Vision Loss
- Formation of cysts or pseudo-tumors
- Perforation of organs
- Device Migration
- Erosion of material
- Auto Immune Disorders
- Unwanted Pregnancies
- Wrongful Death
Types of FDA Device Recalls
- Safety Alert—this is a more serious recall which requires the responsible company to issue a notification to device users if its use poses a risk of substantial harm. If the use of the device causes probable adverse health consequences or death, a safety alert is issued.
- Device Enhancement—device enhancements are meant to improve the performance or quality of a device. An enhancement is not necessarily intended to remedy a violation or defect, however, the FDA may closely monitor the reasons for the change.
- Inappropriate Labeling—quite often a medical device will be produced with labels that are considered false or misleading. If it fails to display adequate directions for proper use, the device could be recalled for inappropriate labeling.
- Non-compliance with FDA Regulations—if a manufacturer or distributor fails to comply with FDA law, and if an incorrect move is taken toward correcting or removing a marketed device, a recall is likely.
- Failure to Meet Specifications—misrepresentation of a medical device is considered a crime. If a device fails to meet a represented specification or doesn’t perform as represented and lacks qualities it is said to possess, this constitutes a recall.
- Correction—Corrections are actions taken by a company producing and marketing medical devices to deal with a dangerous product without physically removing the device. This may include modification, repair, relabeling, adjustment or inspection (including patient monitoring).
- Market Withdrawal—Withdrawals, in most cases, involve no FDA violation, but the device is withdrawn for repair, equipment adjustments and normal stock rotation.
- Routine Servicing—this may include replacing parts at the culmination of their normal life expectancy. Manufacturers and distributors may need to execute calibration, replace batteries, and respond to normal wear of a product.
- Stock Recovery—Recoveries usually involve correcting and removing any device that is yet to be marketed or one that is still under the direct control of the manufacturer. A device could still be found on the manufacturer’s premises without having been released or among units involved in a removal or corrective action.
Compensation for Victims of Defective Medical Devices
Due to safety pitfalls in the FDA approval process for new medical devices, many defective products injure American consumers each year. As a result, injured patients and experienced product liability attorneys are forcing medical device companies to claim responsibility and compensate the many victims.
If you or a loved one has suffered an injury due to a defective medical device and have questions about the legal remedies available to improve quality of life and medical care in Ohio, contact The Lyon Firm at (800) 513-2403. You will speak directly with Mr. Lyon, and he will help you answer these critical questions.